| Base parameters | |
| Measuring medium | Liquids such as oil that are compatible with contact materials |
| Measuring range | 0～5～30kPa |
| Pressure mode | Gauge pressure |
| Media temperature | -40～100℃ |
| Response frequency | Analog output≤ 30Hz, digital output≤5Hz |
| Stable performance | ± 0.1% FS/year |
| Overload capacity | 200% full scale |
| Temperature drift | ±0.01%FS/°C (temperature compensation range) ±0.05%FS/°C (outside temperature compensation range) |
| Ex type | Intrinsically Safe Ex ia II.C T6 Ga Note: Intrinsically safe must be powered by a safety barrier or intrinsically safe power supply |
| Degree of protection | Probe IP68, junction box IP66. Note: The above protection level refers to the electrical connection after it is complete |
| On-time | 20ms |
| resolution | Analog output 0.01%FS, digital output 0.05%FS |
| Output power | |
| Output signal | 4~20mA,RS485,0~10VDC,0~5VDC,1~5VDC |
| Power supply range | 9～32VDC,15～32VDC,15～24VDC |
| Accuracy class | 0.25%FS,0.5%FS |
| Power range | |
| Current type | ≤0.02Us(W) |
| Digital | ≤0.015Us(W) |
| Voltage type | ≤0.008Us(W) |
| Power range | |
| 4~20mA | Yes/No Display≤0.02Us(W) |
| RS485 | With display ≤0.02Us(W), no display ≤0.015Us(W) |
| 0～10VDC | Yes≤0.02Us(W), No display≤0.008Us(W) |
| 0～5VDC | Yes≤0.02Us(W), No display≤0.008Us(W) |
| 1～5VDC | Yes≤0.02Us(W), No display≤0.008Us(W) |
| Output power | |
| Voltage type | ≥10kΩ |
| Current type | Current type load ≤{(Us-7.5)÷0.02(Us=Supply voltage 2)}Ω |
| Environmental conditions | |
| Ambient temperature | -40～85℃ |
| Ambient humidity | 0%~95%RH(no condensation, no condensation) |
| Overall material | |
| diaphragm | 316L stainless steel (contact) |
| Probes | 304 stainless steel (contact) |
| Junction box | Die-cast aluminum |
| Sealed | Laser welding (contact with the medium to be measured) |
| Display window | ≈ 6mm explosion-proof glass |
| Mechanical stability | |
| Seismic performance | 10g(20… 2000Hz) conforms to IEC60068-2-6 standard |
| Impact resistance | 500g/ms conforms to IEC60068-2-27 standard |
| Electrical protection | |
| Short-circuit protection | perpetual |
| Anti-polarity protection | No damage, but not working |
| Insulation resistance | ≥100MΩ,500VDC |
| Dielectric strength | 500VAC |
| Output limits | |
| 4-20mA | 4mA~20mA |
| RS485 | 0~2000 |
| 0～10VDC | 0.001VDC~10VDC |
| 0～5VDC | 0.001VDC~5VDC |
| 1～5VDC | 0.001VDC~5VDC |
